Known as: sealing bellows / sealing sleeve

View/Change Diagram

911 1970-73 - Electrical	912 1965-69 - Electrical
914 1970-76 - Pedal System/Levers	911 1965-69 - Electrical

High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

356 1960-65 - Pedal System/Levers	911 1970-73 - Pedal System/Levers
911 1970-73 - Pedal System/Levers	911 1974-77 - Pedal System/Levers
912 1965-69 - Pedal System/Levers	914 1970-76 - Pedal System/Levers
914 1970-76 - Pedal System/Levers	911 1965-69 - Pedal System/Levers

The 6al delivers everything the 6a does with the addition of a built-in soft touch rev control. This feature allows you to set an rpm limit to protect the engine from over-rev damage caused by driveline failure or missed shifts. Other msd rpm controls can be connected to the 6al such as a three step module selector or rpm activated switch . The 6al also comes supplied with rubber shock mounts and 3000, 6000, 7000, 8000, rpm modules. All necessary parts and wiring instructions are included.

Note: some applications may require msd tach adaptor, part number r8920.

Operating specifications: operating voltage: + 10-18 vdc, negative ground; current requirements: 5 amps-5,000 rpm, 10 amps-10,000 rpm; rpm range:...(choose a part on the right to read more)

General Fitment

Front shift rod rubber dust boot @ firewall

View/Change Diagram

914 1970-76 - Pedal System/Levers

Restore precise shifting with this set of polyurethane coupler bushings. This replaces the original rubber bushings inside of OEM part # 91142402404 . To save installation cost / time, we recommend installing a new conical screw, part # 90142422900 coupler sleeves, part # 91142429400 and 91142429200 be sure to check / replace the shift rod bushing as well, part # 91142413900 , the friction ring, part # 91442422400 and rod bushing conical screw, part # 90142422900 sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

This reproduction boot fits on the plastic cover of the shift console at the transmission and keeps dirt out of the bushings for extended life. It replaces the no longer available shift linkage boot for your side-shift 914

View/Change Diagram

914 1970-76 - Pedal System/Levers

The rs model engine mount is not a hydro-elastic mount like most models. It contains a rubber core with an 85-shore hardness value. That equates to a more responsive chassis and improved shifting response. A perfect compromise for street and track use as it is more forgiving than aftermarket solid mounts. Sold individually. 2 necessary per car. To install these mounts on any model 964 / 965 / 993 and 993 tt, we recommend our rs engine mount set that includes 2 mounts and all the mounting hardware, part # FVD375964

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Bolt-in replacement for the compliant; factory rubber mounts.

Reduces engine/trans movement for better shifting.

Cnc machined from 6061-t6 aluminum billet for high strength, light weight, and a perfect fit.

All necessary hardware is supplied in metric class 8.8.

General Fitment

Who doesn't love the fragrant smell of leather? Add a dash of luxurious leather to your shifter; after all, the stock rubber factory boot is plain looking! Rich leather, and a perfect fit.
Fits 1960-65 356, 1965-71 911 and 912 and all 914s.
Does not come with shift assembly nor shift knob.
This part has a 2-3 week lead time.

General Fitment

Replace your worn-out, original soft rubber engine mounts with our higher density, rs specification rubber bushing. This is manufactured of rubber with a 75-shore hardness value. 75-shore is the same density as what is used in the rs models. It is more durable, provides more positive, sharper shifts and offers crisper throttle response. Yet, rs spec rubber is still quiet and comfortable for street use. Features: sharper shifts crisper throttle response does not produce nvh (noise vibration harshness) like teflon or solid bushings rubber has a shore hardness value of 75 (like rs models) made in Germany this mount is a high-quality OEM (original equipment manufacturer) replacement part, designed to perform like t...(choose a part on the right to read more)

Numeric racing high performance shifter cables can transmit additional noise and vibration inside the cabin. These silicone insulation tubes are designed to reduce the intrusive cabin noise. We recommend them for any street car. Sold as a set. 1 set accommodates one set of numeric racing high performance shifter cables. Instructions: cut the tube in a spiral so that you don't need to use any zip ties to hold it on. One twist per foot will work just fine. It is also important that you reuse the rubber grommet that hold the cables in the firewall.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedite...(choose a part on the right to read more)

Are you experiencing vibrations in the cabin? The most likely cause is a worn transmission mount. Severely worn mounts translate to engine component wear and can even cause difficulty shifting. Our mount is manufactured in europe by an OEM supplier using the finest materials. It is a 65 shore rubber hardness value which is the same as the what was standard on these cars. Be sure to swap yours out during your next service. Sold individually. Central fitment in transmission carrier 96437502301. 1 qty. Required. Tech tip: now is the time to replace the old hardware as well. Below is a list of what is needed for installation. 1 qty. Hex head bolt m10x100 90007429202 1 qty. Lock nut m10 49020001 2 qty. Washers 10.3x...(choose a part on the right to read more)

Sold as a set of (2) upgrade your soft rubber engine mounts with our solid engine mounts. - precise shifting - better throttle response - cnc machined aluminum - sold as a pair with all mounting hardware - more responsive chassis - made in Germany note: you feel more vibration and hear more noise with solid mounts.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Are you experiencing vibrations in the cabin? The most likely cause is a worn transmission mount. Severely worn mounts translate to engine component wear and can even cause difficulty shifting. We can offer your c4 a more sporty feel without the harsh vibration from a solid mount. Our transmission mount is manufactured in europe by an OEM supplier using the finest materials (high carbon steel, 7075 t6 aluminum and 85 shore rubber - rs spec). The rs spec shore rubber offers the c4 sportier handling without being too stiff for street use. Be sure to swap yours out during the next service. Sold individually. Central fitment into the transmission carrier bracket 96437502301. 1 qty. Required. Tech tip: now is the ti...(choose a part on the right to read more)

The quick six mounting kit enables you to immediately bolt a six-cylinder engine into your 914-4, using the factory engine pods. the '73-76 bodies, however, do require the purchase of the early rubber engine mounts. The bulkhead mount is for the serious six conversion. Welded in by a competent mechanic, it allows you to eliminate the four cylinder mounting pods allowing more clearance for valve adjust, easy removal of the rear shift bar and most importantly shifts the center of weight further forward to the factory recommended position. Includes 930 engine mounts

General Fitment

Replace the worn-out, original soft rubber engine mounts with our higher density, rs specification rubber bushings. These are manufactured of rubber with an 85-shore hardness value. 85-shore is the same density as what is used in the rs models. It is more durable, provides more positive, sharper shifts and offers crisper throttle response. Yet, rs spec rubber is still quiet and comfortable for street use. Features: sharper shifts crisper throttle response does not produce nvh (noise vibration harshness) like teflon or solid bushings. Rubber has a shore hardness value of 85 (like rs models) made in Germany sold as a set. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 wee...(choose a part on the right to read more)

Solid bushings and mounts allow you to achieve exact suspension articulation which improves handling and stability on lowered / race prepared cars. The original soft rubber bushings can deform under track loads which allows the sub frame to shift and throw the camber and toe off. Solid bushings will not deform and will keep the camber and toe settings in line which equates to confidence in cornering and faster lap times. These are intended to replace the soft rubber bushings on the original rear sub frame (part #'s 993 331 051 00 & 993 331 052 00). They are made in Germany and are TUV approved. Sold as a set. 1 set is necessary per car. Please note: if you are also driving your car on the street, they will res...(choose a part on the right to read more)

Have you ever looked at your stock rubber shift boot and thought "i wish that was leather." well, here is your chance to make the quality of your shift boot match the quality of the rest of your interior. a nice brown leather finish sets off your interior perfectly. This part has a 2-3 week lead time.

General Fitment

Re-engineered and tig welded from chrome-moly steel,the quick six mounting kit enables you to immediately bolt a six-cylinder engine into your 914-4, using the factory engine pods. the '73-76 bodies, however, do require the purchase of the early rubber engine mounts. The bulkhead mount is for the serious six conversion. Welded in by a competent mechanic, it allows you to eliminate the four cylinder mounting pods allowing more clearance for valve adjust, easy removal of the rear shift bar and most importantly shifts the center of weight further forward to the factory recommended position. Powder coated finish.